High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ High Efficiency Speaker Asylum ]

---

[ Alert Moderator ]

---

which compression driver for my 52cm Tractrix horns

Posted by Jacobusje (A) on July 3, 2007 at 09:25:21

Hello guys,

So, Recently I bought a pair of 52cm Tractrix horns meant to crossover at 500Hz. Now, previously I asked which 2inch compression driver was a good choice. Radian 950, TAD 4002 and JBL 2446 were mentioned. Now, I also can get 1'' and 1.4'' adapters for my horns, which would give me more compression drivers options. I would think that 1'' and 1.4'' drivers have a better extended response, suffering prob. in the low mid.

So, taking into account that I could use 1'', 1.4'' and 2'' inch driver, crossing at 500Hz (12dB?) which ones are recommendable? E.g. I could now go for Altecs 288 (not so extended) or maybe the 806,808? but also a lot of other drivers like B&C or Beyma are now an option.

Please share your thought and ideas, which driver to use for my horns? 500Hz and extended as much as possible.

Thanks,

Jacob

Edits: 07/03/07

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---