In Reply to: Crossover for 12" Monitor Red posted by Jazzman on May 14, 2007 at 05:33:55:
greetings,i did this with a pair of hpd-315's, it is definately worth the effort. i recieved a ton of advice from people around the world, that in itself was fun, at http://www.hilberink.nl/speaker.htm. the only change i made was to eliminate the notch filter, i choose to use the neutral setting as permanent and i'm happy with that. i called tannoy na to get the correct inductor value to make that happen and they were very helpful. i used high quality parts so there was no way i could make them fit in those xo boxes, i built the xo's on a peice of mdf and hung them on the outside back of the new 150l cabinets. the bigger cabinets improved lf response considerably.
best,
dan
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Crossover for 12" Monitor Red - nad 04:25:29 05/15/07 (0)