|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: Don't Have Dayton 15" IB Woofers Yet Re: Holding out on me huh? posted by Dr Deville on March 5, 2007 at 15:08:49:
I will forgive you:)If I can be of any service in the design of your preamp or amp just ask. The guys on diytube are sharp (sometimes ruthless) if you can post a schematic.
Other than you going with a wide range driver and me going with a compression driver/waveguide combined with midrange we are doing the same thing. It was just to much to bear....the thought of digitizing my vinyl....so we also differ on crossover as I will try an analog one. Be sure to get the behringer mike and spend some time reading. Likely you will need to attenuate the behringer outputs.
I'd need to see the behringer schematic to really comment. But what the mods are is very much the same as what is current practice with CD/DVD/DAC these days. An output transformer is a great answer because it is a bandwith limited (and gets rid of a coupling cap). Remember the stage you are ditching is a brick wall filter at 20khz. The good news is your ears, speakers, and output transformer in your SET are all pretty good filters at that hertz.Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- In that case George - Russ57 16:39:36 03/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
