|
Hi-Rez Highway New high resolution SACD releases, players and technology. |
|
|
|
Hi-Rez Highway New high resolution SACD releases, players and technology. |
|
In Reply to: Sony SCD-1 sled question again posted by stevey88 on April 18, 2007 at 09:17:59:
Although this motor is primarily intended for 3 V use, the spec sheet says that it can be used at 1-6 V. If interested, look at http://www.daisy-laser.com/products/CD/mechanisms/vam1202/vam1202_12V1.daisy.pdfSchematic in SCD-1 service manual (page 28) shows that sled motor is not driven directly from 12 V supply. It is driven by a chip with the output voltage of 6 V.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RF-300CH 11400 is right. - sser2 15:30:29 04/18/07 (3)
- motor order - sser2 17:52:59 04/18/07 (1)
- Re: motor order - buceysndmstr48@yahoo.com 06:40:34 04/19/07 (0)
- sorry, the link is wrong - sser2 16:08:18 04/18/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
