Tweakers' Asylum

RE: Crystals and epoxy: I want to understand

172.58.15.151

Enochisvalid

In Reply to: RE: Crystals and epoxy: I want to understand posted by aupiho on May 11, 2024 at 06:24:07

I use toumaline in copper tubes and it takes a large amount to have a significant effect. A thin layer would not effect a whole lot anyway. But in regards to going through thin epoxy. Yes since it will go through pvc insulation in the magnetic flux close by.
Enoch is valid !

Follow Ups:

RE: Crystals and epoxy: I want to understand - Enochisvalid 11:07:08 08/16/24 (0)
Rochelle salt is supposed to be more effective, but havent tried that yet. I wonder if it will react will copper and corrode. I intend to try soon. The cheap way. Also an empty copper tube like a foot long infront of my lap top helps somewhat to dampen the rf. Held off the surface like 1/16 by glue and must have caps on ends closed up for a cavity filter. Effective enough that 2 of these in front is to many as will weaken signal. But 5 lashed together by aluminum tape staggerd underneath the laptop seems ok to help somewhat. Not a perfect solution, but cheap.
Enoch is valid !
News flash! Tourmaline is pyroelectric. Hel-loo! Nt - Geoffkait 05:02:30 08/16/24 (0)
Nt

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

McShane Design