![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
222.127.228.7
In Reply to: RE: VCAPs break in approach posted by oris98 on July 25, 2007 at 16:45:08
there are commercial "cap cookers" But what I did was run them across speaker terminals of a "detuned tuner" to produce white noise. My small transistor radio gives out less than a volt of white noise AC. I also rigged up a bridge rectifier (of the poorest quality) straight out of the wall, to produce a scraggly 120Hz or so of signal. Am also thinking of putting in a transformer right after the rectifier, at some future weekend. That should produce pure AC of substantial voltage. Hope this helps.
Follow Ups:
I also rigged up a bridge rectifier (of the poorest quality) straight out of the wall, to produce a scraggly 120Hz or so of signal.You had better be careful here. Directly rectifying AC line voltages is serious business. You come in contact with that high of a DC voltage with no current limit besides a 15 amp service breaker, it may be the last thing you ever do.
Am also thinking of putting in a transformer right after the rectifier, at some future weekend. That should produce pure AC of substantial voltage. Hope this helps.
Think again, placing a transformer after a rectifier will produce nothing except for possibly some smoke.
thanks for the warning/reminders ... hehehe. am "cooking" 600v and 1,000v plus capacitors in my bridge. and if I should opt later to install a transformer after the bridge, I'd but a blocking capacitor.
a blocking cap is not going to do anything either.
Sure that will block DC but it will also leave you something a long way from the pure AC of substantial voltage you think you are going to get.
Use a stepup transformer powered directly from 120VAC to produce your HVAC then rectify it with some decent HV rectifiers.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: