![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.156.196.162
In Reply to: RE: Brass as a power conditioner housing posted by Aurum on June 11, 2007 at 00:02:58
Hi.
I have seen some audiophile grade power strips & powerline conductors installed in housing built with thick shiny brass plates, asking for big bucks.
Quite a few willing audiophiles find such brass plate housings improve the sound vs steel or plastic enclosures. Believe it or not?
From RFI/EMI shielding aspects, thicker the shielding enclosure will get better absorption loss to more I^2R loss inside the shield material. Brass, being a largely copper+ less zinc alloy, is more conductive than steel which is perromagnetic. It offers much better reflection loss to
high frequency noises (beyond 10MHz).
It worths giving it a try if your local brass plate supplies won't charge you too much.
c-J
PS: many musical instruments are made in brass, right?
Follow Ups:
As long as someone is spending big buck$, isn't bronze to be preferred to brass?
Hi.
Layman term for brass is yellow copper, & bronze is green copper.
Both are copper alloys. Brass, also called 'commercial bronze', is commonly made up of 90% copper & 10% zinc. Bronze is typically made up of 88% copper & 12% tin.
My audiophile friends use power strips or power conditioners built with thick brass plates only, not bronze.
It is not a matter of cost more or less, they find brass plated power strips or powerline conditioners sound better.
c-J
one reason why brass, bronze or copper sounds better is that they are conductive metals and will pass any eddy currents through them much quicker than steel which has a much higher electrical resistance. In addition they are non magnetic so there will be less magnetic induction.
Stu
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: