Tubes Asylum

Picture of Circuit Board

50.242.181.6

svisner

In Reply to: RE: Depends on the circuit posted by Triode_Kingdom on June 22, 2024 at 15:49:32

Image attached.

Follow Ups:

Simpler problem - Chip647 11:31:44 06/27/24 (1)
A 6SN7 is a fairly large tube compared to the stock tube and coupled with an adaptor on its base it is unlikely to fit in its chassis.

On top of that, the tube is most likely just used as an output buffer/cathode follower which has very little impact on sound between tubes.
- RE: Simpler problem - svisner 06:31:32 07/26/24 (0)
  It did fit, just.
RE: Picture of Circuit Board - Triode_Kingdom 21:05:15 06/22/24 (0)
Can't tell anything from that. It would require a schematic with component values and at least the plate supply voltage to make a reasonable determination.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors: