|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.90.100.230
In Reply to: RE: I wouldn't have guessed that anyone would.... posted by Palustris on June 22, 2024 at 09:15:26
As you know, those are some really bad assumptions.
There are manufacturers that claim their power amps can use all the different beam power and power pentode tubes but that is nonsense.
If the amp is optimized for any one of those tubes, it will not be for the rest.
As for gain stage tubes. Pretty much the same thing. Even if you can plug a 12ua7 into a circuit designed for a 12ax7 without it blowing up it doesn't mean you should. Unless you don't care about distortion (or maybe you are looking for distortion?)
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Follow Ups:
...the 12AU7 is certainly the place to find it! I think back on how many times I glossed over your (as well as Eli Duttman's, among others) posts about the non-linearity of the 12AU7.
Meanwhile I was trying different coupling caps, improvements to the power supply, even different resistor types to try and coax some music out of my ST-70 with a 12AU7 circuit.
Then one day, after reading one of your posts about the clear superiority of the 6CG7 for who knows how many times, I finally paid attention. But rather than cutting board traces, and since I already had a few 6SN7s, I bought an 12Au7 socket to 6SN7 tube adapter to try in the circuit's voltage position. After so many previous disappointments I wasn't expecting much, but couldn't quite get over the level of improvement. I could finally listen to this amp for musical pleasure.
When I think of how much time, money and frustration I wasted, when the problem was the 12AU7 in the gain position all along. Ugh! What an awful tube to use for amplification.
.
Have Fun and Enjoy the Music
"Still Working the Problem"
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: