|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.17.68.235
In Reply to: RE: EL38 in a Cronus II magnum posted by oreillyreally on September 09, 2023 at 15:04:03
I have never heard of that tube. Did you already have a set, or seek them out?
Follow Ups:
I used EL38 in triode for a while - probably the best pentode in triode output I've used, with EL12n a close second. I don't like using tubes with top caps, but the sound was marvellous. Especially the "fat bottle" ones.
I just popped in here to see if I could validate my experience with the Mullard EL38 triode set. What you said is my experience. Its not a clone of the EL37 with a top cap. But a different tube in its own right. Dont look for operating points from EL37 and certainly not from the EL34.
Ive had to order a new uTracer. When built I'll trace the triode curves. But I found for now 300 ohm cathode resistor 380v anode volts holds it at max dissipation. 400v and its dissipating 29watts.
I dont get any plate hot spots at 380v.
Its much more lively than an EL84, I like the tone of the EL34 triode but this valve is more live sounding. Foot tapping body engaging live music.
Quad 57's love it. As soon as I tried it I went back on ebay to buy another nos pair.
Im not excited by low power dht's these days. Too polite and boring.
As my op I have been running them for a month or so, with adapters, but my question is: am I doing the bias wrong re EL38 vs EL34 on this particular amp...
Edits: 09/09/23
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: