|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
108.200.223.64
In Reply to: RE: Measurements or it didn't happen... posted by Triode_Kingdom on August 14, 2023 at 14:21:02
Sadly, no longer with us.
Perhaps some of the answers are in the listed thread?
" Don't look back. Something may be gaining on you"
Satchel Paige
Follow Ups:
Hmmm, I was part of that discussion you linked. Sorry to hear about the designer. You can't post the two schematics?
6BL7 looks very linear to me to -20 volts bias. 12SN7 linearity craps out after -10 volts, but very good to -10 volts. Some 6SN7 tubes do not sound that good.
How much idle current? At what angle is your load line?
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Assuming constant current (high load impedance, a horizontal load line) it looks pretty linear to me well beyond -10.
It looks like a 16 volt peak to peak grid signal will drive the plate voltage 162 volt below idle and 162 volts above idle. You can't get any more linear than that.
Sorry, I can't draw a straight line.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Tre, on first plate curve what tube is it? No tube is shown on that plate curve like your second plate curve post.
6sn7/12sn7
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: