Tubes Asylum

It was the tube.

72.197.10.12

Cougar

In Reply to: RE: Weird tube noise... posted by Triode_Kingdom on May 26, 2023 at 23:10:35

tapping on it stopped the tube from being noisy. Also checked it with a scope when I completed the build to make sure it wasn't oscillating.

Follow Ups:

RE: It was the tube. - Triode_Kingdom 18:32:47 05/27/23 (2)
You said: "only made the noise when I turn up or down the volume, other than that it was dead quiet." How could the VC make noise unless the tube was oscillating? Probably the measurement just missed it for some reason.
- At first... - Cougar 18:49:40 05/27/23 (1)
  that tube would only make noise as I turn up or down the VC, once I stopped turning the VC it was dead quiet. Then after a few months of using it like that it started to make noise without moving the VC, it was a little crackling noise. I would tap on the tube to stop it from making noise. Then I moved the noisy tube to the left channel and the good tube from the left to the right, it did it with the bad tube the same thing in the right channel. Like I said at the first post I thought it was a bad VC that needed cleaning due to oxidation but it wasn't, it was the tube that why it was so weird.
  When I checked it with the scope after building it with 1khz and 10khz square wave and sinewave it was all good, no ringing or oscillation. That scratchy noise was always there from the beginning, I never saw it on the scope when I turned it up slightly when measuring it. All I know it was the tube and with the new tubes in there its all good even with the scope measurements. Well, its all fixed now and working fine. I was just wondering if anyone else had anything similar to what I had.
  
  Edits: 05/27/23
  - RE: At first... - Tre' 16:30:51 05/28/23 (0)
    Whenever I run into a noisy VC that has been cleaned, I check the coupling capacitors. DC on a VC is always noise.
    
    Tre'
    Have Fun and Enjoy the Music
    "Still Working the Problem"
RE: It was the tube. - Jim McShane 12:00:17 05/27/23 (1)
Just a reminder - if you are facing noise problems and you think it might be tube related check out my FAQ post. It may be helpful.
- (Open in New Window)
- I did check and... - Cougar 18:52:03 05/27/23 (0)
  cleaned re-tensioned the sockets, cleaned the tune pins, and checked for bad solder joints.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

VH Audio