|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
173.175.57.206
I posted a while back that I had bought a Pioneer 707. Since then I have bought around a dozen vintage tapes. I notice that 80% of them are at a good listening volume when my pre is at the 10 o'clock position. This holds true also for LPs and CDs indicating a signal size in the same ballpark for the differing formats. However, a few tapes require a preamp setting of around 3 o'clock. Would this indicate age-related wear issues or simply how some tapes were made? My only real complaint is that with these few tapes, tape hiss is quite audible. Any thoughts?
Follow Ups:
Nt
No age-related issue, someone simply recorded at too low a level. Happens all the time. Nothing you can do about it. Were these the commercial recordings, or home made ones? I guess the latter.
Actually, two different commercial pre-recorded. Angel was one label, I can't recall the other. I was puzzled because they were not homemade.
Edits: 04/29/20
They still could be homemade; someone may have recorded over the commercial pre-recorded tape(s). I have a Rolling Stones Aftermath tape that someone recorded an LP to it. It sounds great, but the Volume Level is also too low.
They possibly used low grade tape, with very narrow dynamic range.
P.S., perhaps not so puzzling in some regards as I have records and LP's that all need different preamp settings to one degree or another for comfortable listening. This just seemed extreme.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: