Tape Trail

Do bias/level calibration and azimuth lose their settings if the deck (Nak ZX-9) is unplugged.Thanks. (nt)

94.11.133.230

Self-Inflicted

.

Regards,
Mike.

Follow Ups:

RE: Do bias/level calibration and azimuth lose their settings if the deck (Nak ZX-9) is unplugged.Thanks. (nt) - ironbut 12:35:42 04/07/15 (0)
Anything with electrolytic caps in the circuit can go south in time. So, if the machine has been sitting around and you put a tape in that worked fine the last time you used the machine but it has issues now, it could be the sensor circuit, the tape, the power supply or a combination.

So, unless you have a way of checking the machine outside of it's built in diagnostics (a repair tech) you'll just be guessing.
I suggest you clean the machine and run it for a while. I might just need a little work out. Try using a variety of tapes. You might have one that has some issues.
RE: Do bias/level calibration and azimuth lose their settings if the deck (Nak ZX-9) is unplugged.Thanks. (nt) - zako 08:38:12 04/05/15 (0)
shouldn't.

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors: