 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
174.196.133.234
In Reply to: RE: A Question for All... posted by John Elison on January 28, 2023 at 06:52:33
Ah, the old Monster Cable concept, bigger is better. Bravo! Some of the very best cables I've heard were actually extremely thin. Go figure.I trust all those strands in your. Super thick cables are all in the same direction and in the correct direction. ;-) ;-)
Edits: 01/28/23Follow Ups:
Well, the current flow alternates. Therefore, I don't think there is such thing as wire direction. At any rate, it will be in the correct direction for only half of the AC music signal anyway. Therefore, you can't win the wire direction fantasy so there's no sense in worrying about it.
On the other hand, with all those fine strands of wire in my speaker cables, the probability is very high that half of them will be in one direction and half in the other. Consequently, that might be the reason my speaker cables sound so much better than any others I've tried. :-)
Happy listening!
John Elison
We are at an impasse. You don't believe in wire direction. And I am not in the mood to convince you otherwise. Current is a calculated number, it has no direction. Current is determined by the number of moving free electrons. There are two wires in an AC circuit, we call them + and -. Thus, when the signal comes into the speaker on one wire it is going out on the other wire, and vice versa. So direction is important, since wire is physically and electrically unsymmetrical. It's really quite simple. Both wire + and - should be in the "correct direction." Stranded wires are most like all in the same direction, that makes more sense than if they were in random directions. But they could all be the "wrong direction" unless the cable is controlled for directionality during manufacture. Like AudioQuest cables and power cords.
Well, isn't it wonderful that wires work just fine in either direction. I've been using wires all my life while not paying any attention to wire direction and they always seem to work just fine for me.
It sounds like you've got direction problems -- not me!
Good luck!
John Elison
Excellent example of logical fallacy. Obviously wires will "work" in either direction, that's not the issue, Mr. Smarty Pants, but wires always sound better in one direction vs the other. I win. You apparently don't even know what directionality is. In any case, I leave you with one final thought. Two wires are needed for the speaker to work, + and -. The incoming signal on + wire makes the speaker diaphragms move out, and the incoming signal on the - wire makes it go IN. It doesn't take an Albert Einstein to see that the incoming signal on both the + and - wires should be in the preferred direction of the wires. You can ignore the signal when it's going away from the speaker in both cases.That's why wire is directional in an AC circuit.
Edits: 05/30/23 05/30/23 05/30/23 05/30/23 05/30/23
Since all wires and interconnects in a stereo system operate just as you describe, how do you find an interconnect in which both conductors are assembled in the correct direction? In fact, how would you ever know unless you build your own? Even then, how would you ever know?
AudioQuest cables are all controlled for directionality, there may be other companies, most cables companies are blissfully unaware of wire directionality or choose to ignore it. As I said all one has to do it try it both ways. That's nit of difficult, is it? A fuse, speaker cables, interconnects.
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
