 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
173.76.156.61
Hello, does anyone know the tube layout for the ampeg V4BH, about 1990. There is one 12au7 which I can not remember the position of and three 12ax7s with 4 6l6gc's I know I should have remembered the positions before I took it apart but you know...anyway the first fuse socket is broken. OK I did try to get the schematic on line for free but no luck.
we should try to get this stuff done cheap. The sockets in question are U1 nearest the output transformer and U2 closer to the power transformer.
One of those sockets should take the 12 ax7 and the other the 12 au7 does anyone know which is which?
Thanks
Bill
Follow Ups:
Try this link
Simple fix
Pay for a schematic
:)
Yes,I know your right. I did find the layout and fixed the fuse holder I was hoping for a quick fix at "the time". I will need a schematic or service manual now, there are worse problems.
Thank you again for the reply and especially for not adding "you cheap ___" at the end of it.
Bill
Nothing wrong with putting out the feelers to see if someone
has a schematic they can email you or give you some advice from experience
on it and save you a few bucks.
Your just giving it a shot and that is not being cheap...just being frugal
Thanks for the schematic website, I can use that and it works well.
Bill
Post a Followup:
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
