|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.164.188.3
In Reply to: RE: Connecting tube amp to sub with speaker level inputs posted by Bill Way on January 14, 2022 at 10:00:32
thank you, I should have included a picture in my original post.
So here it is; this is how I would prefer to connect my sub, IF it is safe for my OTL tube amp to connect this way. In my past experience I have found that keeping the Ref 3A DeCapo speakers full range and just using the sub for very low level and very low frequency augmentation of the DeCapos sounded the best to me.
But I don't know if this is safe to do with the tube OTL...
Don't wrestle with pigs. You both get dirty and the pig likes it.
Mark Twain
Follow Ups:
With our stuff you likely will run into a buzz problem since the output of our amps is balanced (neither side is at ground). But you won't hurt the amp.
I prefer to run a second output from the preamp to the subwoofer.
I run 2 REL T9i subwoofers in stereo, one subwoofer with one M60, in high level input (speaker output level) balanced mode.
Completely quiet.
Quite happy with the additional bass. Speakers are QUAD 989 or KEF LS50, Zero-former at 3X.
I doubt very much my Transcendent OTL is balanced, but if I hear a hum I now have a clue as to possible reason, so thank you!
Don't wrestle with pigs. You both get dirty and the pig likes it.
Mark Twain
-
great, thank you!
Don't wrestle with pigs. You both get dirty and the pig likes it.
Mark Twain
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: