|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
93.67.103.95
One of my JPS Superconductor 2 speaker cables seem to be on short circuit.
When I start tò play music the the sound from one Channel is very love and after few seconds the amp goes on protection.
Someone had the same trouble?
Follow Ups:
Swap the left and right speaker cables. If the problem stays on the same channel it is the amplifier or speaker causing the problem.
If the problem moves over to the other channel it is the cable.
With another pair of speaker cables all works perfect
That confirms your JPS cable is bad.
Have you tested both leads with a multimeter/OHM meter?
Yes, I did it. It's strange but with the tester it shows no short circuit.
Of course with another speaker cable the amp works without troubles.
The Jps Superconductor is made using a cable that had a corrugated copper tube connected to the negative lead.
+1. That's another excellent approach.
Try a different speaker cable to make sure the issue isn't your amplifier.
If the issue shows that the JPS cable is at fault, it's probably a faulty termination. Send them in for evaluation.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: