RE: Hanss T10 running .3% too fast

Posted by joey1127 (A) on June 27, 2024 at 05:55:36

In Reply to: RE: Hanss T10 running .3% too fast posted by flood2 on June 27, 2024 at 01:01:47:

...+.12% for that table is a flaw and it should be returned, not just accepted for what it is, a flawed/defective specimen.

I've sold this table to a local Hi-Fi shop so it's no longer a problem. I'm sticking with my DD which, per the strobe and phone app, is running at the correct speed AND matches up when referenced against an optical disc.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Hanss T10 running .3% too fast - joey1127 17:53:15 06/22/24 (9)

RE: Hanss T10 running .3% too fast - Triode_Kingdom 10:15:24 06/23/24 (1)

RE: Hanss T10 running .3% too fast - joey1127 11:02:48 06/23/24 (0)

RE: Hanss T10 running .3% too fast - flood2 22:51:45 06/22/24 (0)

RE: Hanss T10 running .3% too fast - joey1127 17:57:00 06/22/24 (0)

RE: Hanss T10 running .3% too fast - joey1127 17:55:57 06/22/24 (4)

RE: Hanss T10 running .3% too fast - ralphfcooke 09:13:23 06/25/24 (3)

RE: Hanss T10 running .3% too fast - joey1127 09:35:32 06/25/24 (2)

RE: Hanss T10 running .3% too fast - flood2 01:01:47 06/27/24 (1)

RE: Hanss T10 running .3% too fast - joey1127 05:55:36 06/27/24 (0)

Follow Ups

RE: Hanss T10 running .3% too fast - joey1127 05:55:36 06/27/24 (0)

RE: Hanss T10 running .3% too fast

Post a Message!