|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Coincidence :-) posted by michaelv20850 on May 7, 2007 at 07:48:57:
... in where the drain wire was terminated. So you probably better ask someone else :-)I never knew from drain wires when I started this PC-building odyssey with "The Asylum Power Cord," which uses Belden 19364 as the cable. The instructions were to attach the drain wire to the ground at the AC plug, so I did so. Seemed logical. Then a friend bought some of the same PCs ready made from RAM Electronics and I noted that they attached the drain wire at the AC end too. So I was a little nonplussed to read that I was doing this all wrong.
I queried Lee at CryoParts about whether he had experimented with this on their CryoMax III and he said that, yes, he had. He found they sounded a little different but that he preferred it (the drain wire) at the plug end.
As for how it sounds attached at BOTH ends, I don't want to know.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I feel humbled by our inability to detect differences ... - Dave Pogue 08:23:16 05/07/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
