Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

Is one result of the PE to dynamically load the cable?

Hi Alan,

Does the PE dynamically load the cable? I've read posts by Al in which he recommends using multiple RC networks in parallel, with the caps a decade apart...each with a resistor that matches the impedance of the cable to dissipate RF noise. Oh, and not seeking any divulgence of "what's inside" just curious if it is the same principle.

My understanding is that just using a single 0.47 cap will not effectively couple high frequency noise on the line to the resistor.

I for one am grateful that there are folks with commercial offerings such as yourself who openly share diy ideas like the 193 choke tweak in addition to offering value-oriented products that make an audible difference.

Cheers ~ Mike


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]