Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

RE: Update on my ground loop

Steve,
Glad to hear (pun intended) the ground loop is gone. If I understood the discussion correctly, switching the legs on the breaker for the third circuit is not likely to cure a ground loop--it is for other (EMF, RFI?)noise isolation.

It doesn't sound like you need to check polarity, given that things are fine. But, you may want to purchase a polarity tester from Home Depot or a hardware store the next time you're in one. They are cheap, easy to use (you just plug them in like any other plug), and good to have around. They can also tell you if you have an open ground, for example. Get the kind with the GFCI tester, so that you can test your GFCI circuits.

Louis

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]