|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Advice on soldering solid core to stranded. posted by JerryD6 on May 29, 2007 at 07:57:49:
I had wondered about wrapping vs parallel in terms of the quality of the connection. Parallel is easier to solder and a better solder joint should give a better connection.
Wrong, the first rule of soldering is to make a good mechanical connection first.
The connection should be able to stand alone without solder.
Do not depend on solder to make the connection.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Advice on soldering solid core to stranded. - Tweekeng 19:48:42 05/29/07 (7)
- RE: Advice on soldering solid core to stranded. - JerryD6 07:28:32 05/30/07 (6)
- Pressure in line splice, then solder. - jea48 09:02:06 05/30/07 (5)
- RE:Yes, except.... - Square Peg 12:55:20 05/30/07 (3)
- and to answer your questions.................. - kenster 15:13:28 05/30/07 (2)
- RE: and to answer your questions.................. - Tweekeng 13:37:38 05/31/07 (0)
- RE: and to answer your questions.................. - Square Peg 16:52:24 05/30/07 (0)
- RE: Pressure in line splice, then solder. - JerryD6 10:05:27 05/30/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
