|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I am planning on hardwiring a power conditioner. The wire at the inlet is 12 awg stranded which will be soldered to 10 awg romex. Any particular problems in soldering these wire types? If so, I'd appreciate any advice on how to approach this.
Thanks,
Jerry
This post is made possible by the generous support of people like you and our sponsors:
Topic - Advice on soldering solid core to stranded. - JerryD6 16:01:57 05/28/07 (14)
- RE: Advice on soldering solid core to stranded. - kenster 17:25:05 05/28/07 (11)
- Better "dressed looking" does not warrant better joint. - cheap-Jack 11:39:12 05/29/07 (1)
- I did not say that nor was it implied.......... - kenster 12:38:27 05/29/07 (0)
- RE: Advice on soldering solid core to stranded. - JerryD6 07:57:49 05/29/07 (8)
- RE: Advice on soldering solid core to stranded. - Tweekeng 19:48:42 05/29/07 (7)
- RE: Advice on soldering solid core to stranded. - JerryD6 07:28:32 05/30/07 (6)
- Pressure in line splice, then solder. - jea48 09:02:06 05/30/07 (5)
- RE:Yes, except.... - Square Peg 12:55:20 05/30/07 (3)
- and to answer your questions.................. - kenster 15:13:28 05/30/07 (2)
- RE: and to answer your questions.................. - Tweekeng 13:37:38 05/31/07 (0)
- RE: and to answer your questions.................. - Square Peg 16:52:24 05/30/07 (0)
- RE: Pressure in line splice, then solder. - JerryD6 10:05:27 05/30/07 (0)
- RE: Advice on soldering solid core to stranded. - rick_m 16:20:09 05/28/07 (1)
- RE: Advice on soldering solid core to stranded. - JerryD6 07:28:35 05/29/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
