Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

Re: Duster, change your post a bit

Posted by Duster (M) on May 4, 2007 at 11:42:39

In Reply to: Duster, change your post a bit posted by mattcecil1@yahoo.com on May 4, 2007 at 08:50:11:

Hi mattcecil1@yahoo.com,

What I'm saying is, if a stock unit's connection method involves an inferior quick-disconnect connector (like the one shown in the image), I prefer to solder the connection rather than continue to use a quick-disconnect connector. If a connection method involves a superior clamping plate or set screw method, I prefer to use those methods rather than solder the connection.

For example: Many folks choose to directly solder their commercial loudspeaker's internal wiring from the x-over to the driver's input tabs instead of continuing to use the often used by manufacturers quick-disconnect connectors. They find quick-disconnect connectors to sound inferior to a good solder joint.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---