Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

Re: Hah!

Fortunately my Prem 11 warranty had looong been expired so i don't need to worry abouy voiding the warranty. I just want to tweak or update/upgrade some parts . After removing the top cover, i've noticed that the tube sockets are also quite dirty ( oxidized a bit ) and also some tubes are a bit loose. Maybe due to the aged tube sockets. Any recommendation of good tube sockets? ( ceramic or teflon types )

Anyway , i tried to lay-out your suggested capacitor tweak. Is the schematic below correct ? There is a 18.2K connected on the ground leg of the bias pot which is connected to ground. So i just put the electrolytic cap in PARALLEL to the 18.2K resistor. Am i correct ?


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  

Follow Ups Full Thread
Follow Ups
  • Re: Hah! - Jason Michael 06:30:49 04/29/07 (2)
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]