|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: On the new CJ amps, posted by Jason Michael on April 29, 2007 at 00:44:09:
and void your warranty?.....One cheap tweak: on the ground leg of your bias pots, install a small electrolytic cap (or film if you can find the space) to ground. Usually the ground leg has a resistor to true ground. A 5 to 10uF cap is sufficient at say 50 volts to be really safe will buffer the bias to the tube tremendously, and give your amp a significantly greater control of the bass. Remember the positive leg goes to ground for the bias supply.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hah! - unclestu52 03:18:53 04/29/07 (3)
- Re: Hah! - Jason Michael 06:30:49 04/29/07 (2)
- Re: Hah! - unclestu52 23:13:43 04/30/07 (1)
- Thanks for the tip !! - Jason Michael 10:40:29 05/01/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
