|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Components isolation posted by remi on January 23, 2007 at 07:39:45:
Just to throw in another recipe, mine DIYs are like this:
1/8 inch aluminum plate, 1/2" 5 ply plywood, 1" inch open cell medium density foam, 1/2" 7 ply plywood, 1/8" aluminum plate. The lower plate was drilled to hold points. I used arrow tips that go for $1 each.I'm into spartan "form follows function" so I put a couple of coats of oil stain on the ply and did not cover the sides.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Components isolation - MylesJ 15:41:07 01/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
