|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Using rubber posted by grailer on January 25, 2007 at 10:38:06:
I can't avoid bring up the isolation / dampening discussion :I thought of rubber (thin layer, not a block) as a dampenig material, dampenig being, as I see it, a first stage towards isolation. It would have not been close to the component, and part of an heavier isolation device (think of that thick wooden slab I intended to use as a top sheet).
You seem to think light : do you feel there is something "wrong" with the heavy way?
If I decided to go light, I would then go for a thin (1/2in.) hardwood plate laminated to a foam core layer, laminated to a thick balsa slab (1 1/2in.).
But then, taking in consideration that what I use as a rack is not sturdy as should be, should I use vibrapods or vibracones instead of very rigid studs?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It does! - remi 18:13:43 01/25/07 (3)
- Re: It does! - grailer 19:17:10 01/25/07 (2)
- I think - remi 19:59:02 01/25/07 (1)
- I love it when you speak Latin... - grailer 03:54:34 01/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
