|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Impedance matching. posted by Odyno on January 9, 2007 at 22:40:43:
I have seen something here a while back about small transformer to match impedance with passive pre amp.
Good quality transformer that can be installed inside my small QED passive box.
This would help to get away with the amorphous sound usually associated with passive pre-amp.If by impedance matching you mean something which would reduce the output impedance of your passive, that can be done with a step-down transformer, but that will only work if your amplifier has a fair amount of excess gain. That's because a transformer can't reduce the output impedance of your passive without also reducing the signal level.
se
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Impedance matching. - Steve Eddy 08:52:27 01/10/07 (3)
- Re: Impedance matching. - Odyno 08:56:48 01/10/07 (2)
- Re: Impedance matching. - JoKath 14:06:30 01/10/07 (1)
- Re: Impedance matching. - Steve Eddy 16:10:12 01/10/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
