|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: here's a ref, to the 1.5 times theory posted by Timbo in Oz on January 8, 2007 at 18:26:29:
I have better idea of what you are after. If I get it right, you are trying to get credit for the distance from the center line of the port to the outside edge of the baffle using the floor as the other wall. If the port is located anywhere near the edge of the baffle, I think that that improvement on length would be small, not to mention the fact that the "duct area" is now much bigger. It is an interesting question, not unlike, "how close can I place a rear loaded port to the wall?". I think you are stuck with measuring the impedance curve and going from there by trail and error.Jim N
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- After reading your previous post (below) - jnorv 19:34:58 01/08/07 (1)
- Thanks for that! and you could also try over at Inmates - LONG - Timbo in Oz 00:35:57 01/09/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
