|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Equipment Stand Recommendations posted by SCWiz on January 2, 2007 at 11:21:46:
you'll probably get several different suggestions, but here's how I did it. Like you, I have a sub-optimal situation in that my rack has to be enclosed. We have a media armoire. I built an IKEA Lyte Rack--an affordable but very good DIY design offered by Ken Lyon of Greater Ranges--and placed the whole thing inside a larger media armoire. Obviously, it would be ideal if the rack coupled to your floor (mine doesn't though). The attached link contains a photo of the just the rack. The cost is $60-80 and all you need is a saw and drill. The design is solid; it is based on the principles of light, rigid, low mass, rapid energy dissipation--and should not be dismissed for its low cost. I experienced an appreciable improvement in resolution, transient response and imaging after installing this rack. As far as remote control, maybe an armoire with glass doors? Good luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- One solution - RioTubes 13:50:06 01/02/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]