|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Foil Inductor Lead & Mounting Questions posted by MrDerrick on October 14, 2006 at 06:32:46:
I've mounted Alphacore aircore foil inductors to wood using Goop glue. The exposed ends can be wrapped with teflon plumbers tape. Round wire can be soldered across the foil end, or the foil end can be cut & tapered down to a 1/8" tab that can be curled with needle-nose pliers into a round-wire shape suitable for soldering or crimping. Best to paint exposed copper with polyurethane to prevent oxidation. To the degree possible the inductors should be separated from each other. Avoid inserting metal brackets through aircore inductors.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Foil Inductor Lead & Mounting Questions - Dave Garretson 09:39:20 10/14/06 (1)
- Re: Foil Inductor Lead & Mounting Questions - MrDerrick 07:11:39 10/15/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
