|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I am considering replacing some wire wound inductors with foil wound and have a few questions. What is the best way to insulate the bare foil leads? Teflon tape maybe? Should the inductor be insulated from a metal enclosure? Or should it be mounted with nylon or rubber washers under it? Can it be mounted directly to the metal? Finally, any tips on how to solder foil to posts and wires would be helpfull. This is a first for me, so any advice is greatly appreciated! Thanks, Bob D
This post is made possible by the generous support of people like you and our sponsors:
Topic - Foil Inductor Lead & Mounting Questions - MrDerrick 06:32:46 10/14/06 (7)
- Be careful of interactions with nearby inductors. - Al Sekela 19:56:45 10/14/06 (2)
- Re: Be careful of interactions with nearby inductors. - MrDerrick 06:57:35 10/15/06 (1)
- Yes, use care with the HV transformer... - Al Sekela 14:05:40 10/15/06 (0)
- Re: Foil Inductor Lead & Mounting Questions - pkello44 11:21:53 10/14/06 (1)
- Re: Foil Inductor Lead & Mounting Questions - MrDerrick 07:05:46 10/15/06 (0)
- Re: Foil Inductor Lead & Mounting Questions - Dave Garretson 09:39:20 10/14/06 (1)
- Re: Foil Inductor Lead & Mounting Questions - MrDerrick 07:11:39 10/15/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
