|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Are the leads between IC and caps really short? posted by Jacques on September 15, 2006 at 08:42:01:
I uses 0.1uf Auricap with about 3 cm distance from pin 4 and 8. I put it under the pcb board. The opamps look like buffer at the output of my cdp.Is it very significant to use lead as short as possible? Should I change to Kemet NPO cap? Many people like this cap but I couldn't find it around.
Thank you
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Are the leads between IC and caps really short? - Bom 09:38:33 09/16/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
