|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: My easy speaker stand idea... posted by sharp on September 9, 2006 at 03:24:03:
the top and bottom compress the pvc pipe.if you use 2"pvc then you get a 2 1/8th" forstner bit or paddle bit and make a recess for each pipe at both ends so they cant slide around.
drill through the top and bottom for the rods and countersink for the nuts and washers that will thread onto the rods at each end.
the sand will remain uncompressed and the structure will be very rigid.
this is a standard way of making platforms/stands.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- build the stands so that - snkby 16:11:36 09/09/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
