Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Recommended bias for KT120's... posted by tube Tom on August 4, 2023 at 15:22:10:
There is surprisingly little info ( Make sure the bias is between 80 and 100 ma after 60 seconds or so, and is between 90 and 110 ma after 20 minutes or more of operation. ) and no picture of layout or even mention of rectifier tube on Quicksilver site. I did find some other info from someone who sold a pair & said they could take KT90's & KT120's but no KT150's. They even have 100ma printed by the tubes "DOE!". So yes they will take KT120's "and barely break a sweat" as the seller said.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Recommended bias for KT120's... - tube Tom 21:43:50 08/05/23 (2)
- RE: Recommended bias for KT120's... - 6bq5 12:57:40 08/07/23 (0)
- RE: Recommended bias for KT120's... - sony6060 14:48:21 08/06/23 (0)