Home Tubes Asylum

Questions about tubes and gear that glows. FAQ

RE: Jolida JD-9 phono preamp

Sovtek 12AX7LPS - I've used the Sovteks in my JD9 for a long time with no complaints or urge to tube swap. I 've also tried new production Mullards which were fine (the Mullards eventually landed in my old Jolida cdp.)

From my research and a little experimentation, IMO, 5751s will lower gain/output. For me, gain has never been a problem with the JD9. It had plenty for the 3.3mv Ortofon MC-3 Turbo (a high output mc) and the 0.3mv AT33EV (low output MC). Check your "Low Output" and "High Output" terminals on the back to make sure you're using the right one for your cart. IIRC, the labeling was somewhat counter-intuitive to me when first purchased.


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • RE: Jolida JD-9 phono preamp - dean_martin 14:17:41 07/10/23 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.