Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
I'm using a Jolida JD-9 phono preamp that is about 10 years old. I replaced the stock Chinese 12AX7 pair with new production EH tubes when I bought it new. I would like to make this phono stage sound as good as it possibly can.
I need the highest gain I can get. Would 5751 12AX7's lower the gain? Any suggestions would be greatly appreciated. I have a matched pair of RCA Command 12AX7s that I haven't tried yet.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Jolida JD-9 phono preamp - posaune32foot@gmail.com 13:38:00 07/10/23 (14)
- I did a repair once on a Jolida JD-9 - Story 05:48:37 07/13/23 (2)
- RE: I did a repair once on a Jolida JD-9 - sony6060 06:52:42 07/13/23 (1)
- RE: I did a repair once on a Jolida JD-9 - Nunki 11:05:48 07/14/23 (0)
- RE: Jolida JD-9 phono preamp - The Dill 05:24:28 07/13/23 (0)
- RE: Jolida JD-9 phono preamp - Palustris 07:24:39 07/12/23 (1)
- RE: Jolida JD-9 phono preamp - Triode_Kingdom 16:18:48 07/12/23 (0)
- The gain stages in the Jolida are ICs - garymuffley 16:54:21 07/11/23 (2)
- "all the amplification is done by ICs" Almost true - Tre' 21:21:41 07/11/23 (0)
- RE: The gain stages in the Jolida are ICs - Triode_Kingdom 20:30:59 07/11/23 (0)
- RE: Jolida JD-9 phono preamp - Sondek 10:13:12 07/11/23 (1)
- RE: Jolida JD-9 phono preamp - mraudio 10:49:19 07/11/23 (0)
- RE: Jolida JD-9 phono preamp - 6bq5 19:45:29 07/10/23 (0)
- RE: Jolida JD-9 phono preamp - mraudio 17:24:07 07/10/23 (0)
- RE: Jolida JD-9 phono preamp - dean_martin 14:17:41 07/10/23 (0)