|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Manual biasing with volume or none? posted by robster on April 29, 2007 at 19:03:58:
to have the inputs shorted. Of course, specific manufacturers like Cary will have a recommended method. Generally, though, I like to have the inputs shorted to ensure there's no induced noise to cause my settings to be upset in some way.I'd suggest you contact Cary regarding their specific procedures.
As for monitoring bias voltages while operating the amp, you should expect the bias to change under these conditions - there's audio being passed! If you monitored the bias with a scope you would see audio waveforms.
Cheers,
David
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Normal settings are.... - doodlebug 22:16:08 04/29/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
