Manual biasing with volume or none?

Tubes Asylum

Questions about tubes and gear that glows. FAQ

24.22.19.223

Fellow inmates..
I dropped in new tubes over the last few days into my
Cary SLI-80 and was womdering if biasing is proper under
an input volume or not? I've dialed in the recommended
75mA bias but noticed that as I turned up the volume the
75mA bias flutuated as the volume was turned up.
Probably a dumb question and probably covered off in earlier
posts...but was wondering where bias vs volume should be
considered? Thanks..

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - Manual biasing with volume or none? - robster 19:03:58 04/29/07 (4)

Re: Manual biasing with volume or none? - lipmanl 12:06:07 04/30/07 (0)

Normal settings are.... - doodlebug 22:16:08 04/29/07 (0)

No input signal when biasing is a standard requirement. NT - Chuck Y 19:58:26 04/29/07 (1)

Re: No input signal when biasing is a standard requirement. NT - robster 20:19:29 04/29/07 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.