|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: 5AR4 tube does not light up posted by Jeffrey Wee on February 27, 2007 at 09:03:21:
If you have no experience with high voltage, take this to a technician. This will be easy to diagnose and either cheap or expensive (no in-between) to repair.It could be something as simple as a loose tube socket, which takes about three seconds to fix (just slightly tighten the thing sthat hold the tube pins (whatever you call them). It could also be a cold solder joint (5 minutes) or it could be a bad power transformer (expensive).
It is unlikely that two tubes in a row had open heaters.
Good luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Take it to a technician - lipmanl 09:40:10 02/27/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
