|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: 807 posted by elektron on June 27, 2006 at 12:37:43:
elektron,I have considered triode wired 807's, and, indeed, they are allready installed in the two transmitters that I will use as chasises for the amps. In their original configuration, they were used as triode wired drivers for 813 finals.
I have a bunch of 807's and 6B4G's. I ultimately decided on the 6B4G's for this because I wanted to build a differential amp that was essentiallly two circuits identical to my SET amp in push pull. The design is direct coupled and is similar to what Keto has posted on these boards. With 807's I could play a bit with e-linear, which would also be cool.
Thanks,
Rodney
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 807, I have - j rodney 13:05:31 06/27/06 (4)
- Re: 807, I have - MIchael Samra 14:11:42 06/27/06 (3)
- eek, here I go - j rodney 17:27:51 06/27/06 (2)
- Re: eek, here I go - MIchael Samra 23:24:44 06/28/06 (1)
- I thought the MLs also use some baffel step correction - j rodney 12:24:27 06/29/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
