|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Schematic Sources posted by Ron Oehlert on April 23, 2006 at 11:21:56:
Thinking more about your response.... Thanks. The reason I suspect the unit is because some uninsulated copper leads from far end of both "whatevers" is snipped. It has a chassis bracket, a lead connector modularish plug, and two elongate ceramic (?) tubes. From the sides of those tubes (Suzuki) strap type leads emerge at end close to bracket (grounded); and far ends (snipped). Lead plug comes from 30v taps at potted transformer (2wires); and goes to potentiometers labeled hum for both sides (1 wire for both). It is a regulator (maybe even rectifier combo, although tube rectifier is present elsewhere ?); but paint is gone and part number indistinguishable (probably gets hot). I just want to identify and replace with cap job before going further.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Schematic Sources - Fall out of the Window 17:57:42 04/23/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
