|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
Recently some new production 6L6 tubes advertised as "B" stock, with a slight milky-looking haze at the bottom by the base and up at the top around the flash. Presumably this is an artifact of the manufacturing process, but supposedly doesn't affect the test values of the tube. Any input regarding the source / effect of this phenomenon, implications for use?
This post is made possible by the generous support of people like you and our sponsors:
Topic - What causes whitish "haze" inside tube? - Dingojazz 05:54:40 02/02/06 (8)
- Loss of vacuum. Throw away. (nt) - chriscmore 11:11:24 02/03/06 (0)
- Hard to be sure from here, without seeing it, but sounds like... - Victor Khomenko 06:13:08 02/02/06 (6)
- Re: Hard to be sure from here, without seeing it, but sounds like... - Dingojazz 06:43:08 02/02/06 (5)
- "a reputable dealer"... - KT88 16:14:40 02/02/06 (2)
- Re: "a reputable dealer"... - Jim McShane 13:45:55 02/06/06 (1)
- You can't tell... - KT88 16:01:29 02/09/06 (0)
- Re: Hard to be sure from here, without seeing it, but sounds like... - Mark D. 08:54:14 02/02/06 (1)
- Re: JJ - Jimmy 14:12:26 02/02/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
