|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: Stu, maybe you can help me out posted by unclestu52 on November 30, 2005 at 14:39:44:
isn't the same:( If I had to guess I'd say R1 is 4.7K/half watt and R2 and R3 are 15K/3 watt. But the resistors are burnt and R2 and R3 look like maybe the third band isn't the same...almost like one was 15K and the other 150 ohm. If any of those values sound correct to you that might help. Heck it's dead already I guess I can't make it worse:) But it isn't my table and I hate to ruin it(besides I think the guy will give it to me if I fix it). And yes, Linn doesn't share info...and their stuff is always a pain to work on! But sometimes once they stop supporting a product they will release info to dealers so I thought maybe just maybe you could help.The motor is supposed to be the same as the LP12. Can you confirm? If it is, am I looking for about 80 VAC at 50 hertz to the motor at startup?
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The Valhalla - Russ57 15:57:22 11/30/05 (2)
- Re: The Valhalla - unclestu52 11:47:23 12/01/05 (0)
- Re: The Valhalla - Vatron 19:27:56 11/30/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
