|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Tube tests bad, then good 4 months later???? posted by vrogers3 on November 27, 2005 at 20:01:28:
is the circuit you're using it in. Remember, the tester only tests the tube a one particular voltage, which may or may not be the same as the voltage in the circuit you're using it in. If you have a circuit schematic, you can put it in the circuit and see if it runs at the same voltages that the circuit specifies. If it does, it's good, regardless of what the tube tester says. If it doesn't, it's bad IN THAT CIRCUIT, regardless of what the tube tester says, although it may work fine in another circuit.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Jimmy is probably right, but the best tube tester.... - JimL 05:47:11 11/28/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
