In Reply to: That's a good idea posted by Quiet Earth on April 1, 2007 at 22:26:18:
Exactly...this cable comes with 7 - 18 gauge solid core copper, polyethylene conductors inside a pvc jacket. Strip the jacket off using the rip cord. Make two twisted pair (1-18 awg per leg + & -} with counter-clockwise twists at about 10 - 12 twists per foot. Strip off the ends and connect them directly to the binding posts (no spades or bananas). A two meter pair should take you about 30 minutes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: That's a good idea - rwiley 10:44:32 04/02/07 (0)