|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: Thank you for that link. It was helpful. posted by Quiet Earth on April 1, 2007 at 22:43:48:
I'm using active fitering and eq. from a dbx DriveRack PA, so the EM7 amp driving the B/MR is driving an 8-Ohm load of speakers with NO inductors or capacitors in the signal path, with filterpoints of 40Hz and 2.5KHz. The tweeter amp sees the same kind of load but for 16 Ohms and from 2.5KHz up. The woofers are a 4-Ohm load, again with no reactive components in the signal path.Yes it has lots of amp channels and drivers and ICs, but it sounds VERY coherent...all 'of one cloth'...and frankly it's the best-sounding speaker system I've ever heard...period.
The EM7 amps sound quite nice; try one.
-------------------------------------------------------
Tin-eared audiofool and obsessed landscape fotografer.
http://community.webshots.com/user/jeffreybehr
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Well, it may LOOK complicated, but from an amp's perspective, it's not. - jeffreybehr 09:50:31 04/02/07 (1)
- less complicated without a crossover and bandwidth limited too - Quiet Earth 11:29:45 04/02/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
