In Reply to: Marantz 1120: recapping questions posted by yoonit on May 5, 2024 at 17:15:23:
it looks like a decent amp project for restoration
I would suggest that you replace every single cap in the signal path starting with one input path only, and including the power supply caps.
Otherwise, why bother because you will most likely be going back in many times until you get lucky finding the offending capacitor even if it is a capacitor. It may be something else like a Diode that's not functioning properly or a burnt resistor.
Looks like hours and hours spent unless you get lucky, so good luck!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- did you fire it up for 24 hours before making a judgement? - Story 05:01:03 05/06/24 (1)
- RE: did you fire it up for 24 hours before making a judgement? - yoonit 17:58:26 05/06/24 (0)